Best Wood for Skateboard Deck

Skateboarding is a great active sport that requires the right choice of specialized devices and parts. The deck is too momentous detail in the tool. Therefore, every beginner needs to know what the board consists of: from recycled skateboard wood, plastic or other material. Everyone should learn all the intricacies before buying. After all, a person’s weight and height are also a factor in the selection.

The beginner must start his journey correctly and with the choice of specialized tools that will last a long time. The board affects the service life of the device as well as the health of the person. So, you should focus on all the details and start by identifying the materials of the deck. I will give some advice on the selection in this article. You will understand what the best wood for skateboard deck is and what determines the success at the beginning of riding. So, let’s go?

What Type of Wood Is Used for Skateboards?

Manufacturers make decks from a variety of materials. However, each material differs in properties, various characteristics. According to the features, the boards are of varied quality, rigidity, strength, elasticity, and so on. So, you can see boards made of plastic and wood. I always advise everyone to stop your choice of wooden products.

The Ministry of Wood recommends that the Canadian Maple is best suited for making boards. This material is the most widespread for manufacturing and long-term use. Other good materials to create are birch plywood or bamboo. However, each of them has its characteristics and features. I tried to compare some types of most common materials for making boards. You can view the data with the characteristics in the table.

Canadian Maple

Canadian Maple Wood for Skateboard

Pros

  • The board can contain from 7 to 9 layers
  • Suitable for making quality boards
  • Fairly reasonable prices
  • Does not require toxic treatment
  • Natural, non-toxic material

Cons

  • Not available in the markets
  • It requires clear manufacturing requirements

Bamboo

Bamboo Wood for Skateboard

Pros

  • Hard enough to make deck
  • It has good spring qualities
  • Available in the markets

Cons

  • High price
  • Too rigid for appropriate bends
  • The structure of the material is too fragile

Plywood

Plywood for Skateboard

Pros

  • Affordable price
  • Good to the touch on one side
  • Available to buy

Cons

  • The board can contain 3+ layers
  • Not suitable for quality skates
  • Not too hard surface
  • Predisposition to splinters

According to research by East Tennessee State University, Canadian Maple is the most adapted wood for making skates. The deck can have 6-9 layers made from this material. I advise you to look at such boards. You can ask for advice from a seller or a friend rider if you have one. People with experience probably understand what kind of wood the board is made of. In my experience, maple boards last much longer. They are stronger to perform tricks, do not wear off, and do not chip on the sides too quickly compared to other types of materials.

Of course, you should pay attention to the quality of the production. Each factory has its production technology. Therefore, of course, the products differ in characteristics, materials, and quality. There are also many nuances in the selection that I have described below. You can see the quality of the deck taking it in the arms. If it is wooden, then its layers must be connected with specialized wood glue for skateboards. Otherwise, you may see the delaminating of the layers due to the use of poor quality glue.

What to Look for When Choosing a Board?

What to Look for When Choosing a Board

Probably everyone who goes to buy a skate imagines himself as a successful owner and professional. And choosing the right board is the first step to realizing the dream. So, everyone needs to focus on that and take it seriously. Since the choice of materials is wide today, you need to know many nuances about it. Most professionals recommend maple skateboards. They are characterized by strength, elasticity, and quality. Besides, we should consider a few basic tasks before buying.

Ride Type

The selection of the entire device or its parts depends on the purpose and ways of riding. After all, manufacturers offer various types of boards for fast driving, long-distance riding, performing tricks, and much more.

Quality

The next step is to determine the quality. The buyer should pay attention to several key indicators:

  • You ought to notice many layers of wood. If the material is of high quality, then all layers are smooth and neat.
  • If even the smallest stratification is noticeable at first glance, it is an indicator of poor quality. It is the cause of dryness of wood for a longboard or other skate, which is less elastic and will serve you less time.
  • Pay attention to the roundness, curvature of the board. You can notice the slight concave on all four sides that has a good effect on the control of the device. So, the board is much stronger.

Elasticity

The last step for accurate certainty is to determine the elasticity. I always check one following way. It is effective and suitable even for a beginner:

  • Turn the tool on the board, wheels up.
  • Put one foot in the middle of the deck.
  • Not hard enough wool bends to the ground.
  • And too hard deck does not bend.

All the details are significant when choosing. Therefore, even people with more weight should select quality skateboard decks, pendants, wheels, and others. I often come across questions on forums about deck materials and their grade. Of course, if you are faced with a choice, then you should select a qualitative thing. And the quality depends on the materials, right? Bad board wood can be an immediate cause of sooner damage to the entire tool.

Video

And the Last

The popularity of skates is growing every day. I often see people of all ages on the streets standing on such devices. This activity, of course, adds confidence, balance, and satisfaction. However, incorrectly selected parts can adversely affect the ride quality and injure you.

The correct selection of details plays a significant role in the driving process and directly affects the quality and speed of training. So, in the beginning, you should choose the best wood for skateboard ramps.

I always advise looking at decks made of hardwood with many layers. Maple boards are ambiguously better, and they are darker in appearance. The birch plywood is much lighter. Choose decks based on the number of layers and their pasting. It should be smooth, without bubbles, without stratification. Decks of 7-9 layers are the strongest, heaviest, and hardest. The choice depends on the purpose of your ride.

Health also depends on a well-chosen device. So, I hope you understand what the best type of wood for skateboard decks is. It’s not as difficult as it seems at first glance. In case of failure, ask for advice from sales consultants, or go shopping with a familiar rider. An experienced rider will assist you with the selection.

LEAVE A REPLY

Please enter your comment!
Please enter your name here